Coolant Filling Device - Overview And Setup

Information 

• The servicing equipment is used for the following work: 
• For emptying the coolant from the cooling system. 
• Flushing with compressed air to assist fluid to flow out. 
• Check the hydraulic leak-tightness of the system using pressure and vacuum monitoring. 
• Refill with coolant. 
• The servicing equipment is equipped with an SD card with the specific software as standard. 
• Further help for preparing and using the cooling system servicing equipment can be provided in the Equipment service information. 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Components of filling device for coolant circuit (shown on the Taycan)