Installing Oil Supply Line

Information 

• Fit new O-rings on engine oil lines. 
• Grease O-rings with a light coating of Kluber Syntheso Glep. 
• Remove stoppers before fitting the engine oil lines. 

1. Installation is performed in reverse order to removal.

   Screws securing oil line to cylinder head.

   > Tightening torque 10 Nm (7.5 ftlb.) 

   Screw securing oil lines (pressure side) to turbocharger.

   > Tightening torque 10 Nm (7.5 ftlb.) 

   Screw securing holder for turbocharger lines.

   > Tightening torque 10 Nm (7.5 ftlb.)