LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> Electrical >> Gauges >> 70 Linings, Insulation -- 992 - 911 CARRERA (992) >> WM, 706719 Removing And Installing B-Pillar Trim Panel >> Removing B-Pillar Trim Panel

Removing B-Pillar Trim Panel

  1. Loosen seat belt. Standard seats: 
    1. 1.1  Pull off cap -1-  using a suitable tool.
      G15534353Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Cap

    2. 1.2  Unscrew screw -1-  .
      G15534354Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Screw

    3. 1.3  Remove seat belt mount -2-  .
      G15534355Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Seat belt mount

  2. Loosen seat belt -3-  . Sports bucket seats: 
    G15534356Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Seat belt

    1. 2.1  Pull off cap -1-  using a suitable tool.
    2. 2.2  Unscrew screw -2-  .
    3. 2.3  Guide seat belt -3-  out of the sports bucket seat -4-  . -Arrow- 
  3. Unclip B-pillar trim panel -1-  by pulling it inwards -arrow A-  (-2-  ) and guide it down -arrow B-  and out.
    G15534357Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    B-pillar trim panel

  4. Pull three-point belt -1-  with seat belt mount out through the B-pillar trim panel -2-  (-Arrow  -).
    G15534358Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Three-point seat belt