| Control arm to lower trailing arm |
Hexagon-head bolt, M14 x 1.5 x 95 and hexagon nut |
Tightening torque |
160 Nm (118 ftlb.) |
|
|
| Control arm with front axle cross member (front section) to body |
Hexagon head bolt, M12 x 1.5 x 105/always replace following removal |
Initial tightening |
70 Nm (52 ftlb.) |
|
|
| Control arm with front axle cross member (front section) to body |
Hexagon head bolt M12 x 1.5 x 105/always replace following removal |
Final tightening |
+ 180° |
|
|
| Lower trailing arm cover to lower trailing arm |
Internal hexagon roundhead bolt, M6 x 25 |
Tightening torque |
10 Nm (7.5 ftlb.) |
|
|