Removing Rear Cross Member (Cabriolet)

Drill out penetrated joints with > Diameter 4 mm .
> 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Rear cross member (Cabriolet)
Heat bonding areas using > V.A.G 1416 - Hot-Air Blower .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Remove inner rear cross member (Cabriolet) together with outer rear cross member (Cabriolet).