Preparing Inner And Outer Rear Cross Member (Cabriolet) For Installation

Fit inner together with outer rear cross member (Cabriolet) and secure to the body.

Drill bore holes for countersunk blind rivets through both sheet metal plates using > diameter 4.1 mm .

2.1 Counter bore the rivet holes with > VAS 6957 - 100° countersink .

G14251265

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Rear cross member (Cabriolet)

Remove inner together with outer r ear cross member (Cabriolet).
Prepare marked areas on inner rear cross member (Cabriolet) for bonding and riveting.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Inner rear cross member (Cabriolet)
Prepare marked areas on outer rear cross member (Cabriolet) for bonding and riveting.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Outer rear cross member (Cabriolet)