LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> Collision >> Body Panels >> 53 - Body Rear - 911 CARRERA (992) (2 Of 2) >> WM, 53825500 Replacing Rear Cross Member (Coupe) >> Removing Rear Cross Member

Removing Rear Cross Member

  1. Drill out penetrated joints with > Diameter 4 mm  .

    > 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

    G14250689Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Rear cross member

  2. Heat bonding areas using > V.A.G 1416 - Hot-Air Blower  .
    G14250690Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

  3. Remove inner rear cross member together with outer rear cross member.
scientia non olet · About LEMON Manuals