LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> Collision >> Body Panels >> 53 - Body Rear - 911 CARRERA (992) (2 Of 2) >> WM, 53615515 Replacing Inner Side Panel (Cabriolet) >> Removing Inner Side Panel (Cabriolet)

Removing Inner Side Panel (Cabriolet)

  1. Remove punch rivets using > VAS 852 001 - Body Dent Removal System, Aluminium  and > VAS 6790 - Compact Booster  .

    > 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

    G14251071Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Punch rivets for inner side panel (Cabriolet)

    G14251072Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Punch rivets for inner side panel (Cabriolet)

    G14251073Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Punch rivets for inner side panel (Cabriolet)

    G14251074Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Inner side panel (Cabriolet)

  2. Remove friction weld elements in area -A-  .

    > 5X00IN29 REPLACING FRICTION ELEMENT WELDED JOINT

    G14251075Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Friction weld elements for inner side panel (Cabriolet)

  3. Remove punch rivets in area -B-  using > VAS 852 001 - Body Dent Removal System, Aluminium  and > VAS 6790 - Compact Booster  .
    G14251076Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Inner side panel (Cabriolet)

  4. Unscrew self-tapping screws -1-  from inner side panel (Cabriolet).

    > 5X00IN24 SETTING SELF-TAPPING SCREWS

    G14251077Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Inner side panel (Cabriolet)

  5. Unscrew self-tapping screws -1-  .

    > 5X00IN24 SETTING SELF-TAPPING SCREWS

    G14251078Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Inner side panel (Cabriolet)

  6. Unscrew self-tapping screws -1-  .

    > 5X00IN24 SETTING SELF-TAPPING SCREWS

    G14251079Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Inner side panel (Cabriolet)

  7. Grind down welded seam -2-  .
    G14251080Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Welded seam on inner side section (Cabriolet)

  8. Heat the marked bonding areas using > V.A.G 1416 - Hot-Air Blower  .
    G14251081Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding area on inner side panel (Cabriolet)

    G14251082Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding area on inner side panel (Cabriolet)

    G14251083Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding area on inner side panel (Cabriolet)

    G14251084Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding area on inner side panel (Cabriolet)

    G14251085Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding area on inner side panel (Cabriolet)

    G14251086Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding area on inner side panel (Cabriolet)

  9. Bend up tab -1-  using > VAS 6635/5 - Crimping pliers  .
    G14251087Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Tab on inner side panel (Cabriolet)

  10. Remove inner side panel (Cabriolet).
scientia non olet · About LEMON Manuals