Safety and quality instructions
- Risk of damage to the vehicle
- Danger of injury
Observe the relevant safety instructions.
→ > 5X00IN01 SAFETY INSTRUCTIONS
Observe the relevant general information and information on quality.
→ > 5X00IN07 GENERAL INFORMATION AND INFORMATION ON QUALITY
Observe general warning notes for working on the high-voltage system.
→ > 2X00IN General warning notes for working on the high-voltage system
Observe general warning notes for working on the high-voltage vehicle electrical system.
→ > 2X00IN General warning notes for working on the high-voltage vehicle electrical system
Observe instructions for isolating from power supply.
→ > 2X00IN Isolation from power supply prior to performing maintenance tasks on BEV vehicles
- Protection of electrical components during body repairs.
> 5X00IN02 PROTECTION OF ELECTRICAL COMPONENTS DURING BODY REPAIRS
- Corrosion protection measures during repair work.
> 5X00IN03 CORROSION PROTECTION MEASURES DURING REPAIR WORK
- Information on aluminium repairs.
> 5X00IN05 INFORMATION ON ALUMINIUM REPAIRS
- Body parts of various sheet-steel strengths.
> 5X00IN04 BODY PARTS OF VARIOUS SHEET-STEEL STRENGTHS
- Replacing punch rivets and penetrated joints.
> 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS
- Replacing friction element welds.
> 5X00IN29 REPLACING FRICTION ELEMENT WELDED JOINT
- Set self-tapping screws.
> 5X00IN24 SETTING SELF-TAPPING SCREWS
- Set weld studs.
- Use body structural adhesive.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00