Preparing Support For Installation

Fit in and secure the support.
Drill bore holes for self-tapping screws -1- through the existing holes. > Diameter 4.0 mm
> 5X00IN24 SETTING SELF-TAPPING SCREWS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screws
Drill bore holes for blind rivets through both sheetmetal plates using > Diameter 6.6 mm .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Blind rivets
Remove support.
Prepare marked areas of the support for bonding and riveting.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas