Preparing Rear Cross Member For Installation

Fit in rear cross member using the straightening system and secure it to the body.
Drill holes for self-tapping screws through the existing holes. > Diameter 4.0 mm
> 5X00IN24 SETTING SELF-TAPPING SCREWS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Holes on rear cross member

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Holes on rear cross member
Remove rear cross member.
Prepare the marked areas of the rear cross member for bonding.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas on rear cross member

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas on rear cross member