Preparing Reinforcement For Installation

Drill holes for self-tapping screws -1- through the existing holes with > diameter 4, 0 mm .
> 5X00IN24 SETTING SELF-TAPPING SCREWS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Reinforcement
Drill holes for blind rivets through existing holes with > Diameter 6.6 mm .
> 5X00IN24 SETTING SELF-TAPPING SCREWS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Reinforcement
Remove reinforcement.
Prepare marked areas for bonding and riveting.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas