Preparing Inner Rear Cross Member For Installation

Fit in inner rear cross member and secure it to the body.
Drill bore holes for blind rivets through both sheetmetal panels.
> Diameter 4, 1 mm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bore holes
1. 2.1 Counterbore the rivet holes with > VAS 6957 - 100° countersink.
Remove inner rear cross member.
Prepare marked areas for bonding and riveting.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas