LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> Collision >> Body Panels >> 53 - Body Rear - 911 CARRERA (992) (1 Of 2) >> WM, 530255 Replacing Rear Body (Coupe) >> Preparing Reinforcement For Installation

Preparing Reinforcement For Installation

  1. Fit in reinforcement and secure it to the body.
  2. Drill bore holes for blind rivets through both sheet metal plates using > diameter 6.6 mm  <!-- vee -->.
    G14249861Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Blind rivets

  3. Remove reinforcement.
  4. Prepare marked areas of the reinforcement for bonding and riveting.

    > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

    G14249862Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

scientia non olet · About LEMON Manuals