Installing Corner Panel Of Rear Cover Plate (Coupe)

Information

• Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive.
• The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed.
• Do not begin bonding work until all materials and tools necessary for later repair work are available.

1. Apply adhesive evenly on the entire bonding surface of the body. > Application depth 0.5 mm 

   > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Bonding areas

2. Apply adhesive evenly over the entire bonding surface of the corner panel. > Application depth 0.5 mm  <!-- vee -->

   Also apply a bead of adhesive all around the bonding surface. > Application depth 3 mm  <!-- vee --> <!-- vee -->

   > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Bonding areas

3. Rivet in corner panel of rear cover plate (Coupe).

   > BLIND RIVET 999.190.229.01 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Blind rivets

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Blind rivets

4. Rivet in flow-form rivets.

   > 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

   > RIVET 9A7.008.606.00 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Flow-form rivets