Removing Front Cover
Installation position
- Unscrew screws -1-
.
Fastening parts
- Unscrew nuts -2-
.
Fastening parts
- Detach front cover.
Front cover (shown on the C2)
- 3.1 Unscrew and remove screws -3- .
- 3.2 Pull wheel housing liner overlap away. -arrow A-
- 3.3 Pull cover down and out. -arrow B-
- Swivel front cover -1-
down -arrow A-
and pull it out of the overlap at the front -arrow B-
.
Front underbody cover
- Remove front cover.