Preparing Adapter Plate For Lower Inner Side Member For Installation

Fit in adapter plate on lower inner side member and secure it to the body.
Drill bore holes for blind rivets -A and B- . > Diameter 6.6 mm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Blind rivets
Set self-tapping screws -1- .
> 5X00IN24 SETTING SELF-TAPPING SCREWS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screws
Remove adapter plate on lower inner side member.
Prepare connection areas on adapter plate for lower inner side member for bonding and riveting.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection area on adapter plate for lower inner side member