LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> Collision >> Body Panels >> 51 - Body Center, Roof, Frame - 911 CARRERA (992) (3 Of 3) >> WM, 51425510 Replacing B-Pillar Reinforcement >> Preliminary Work For Body Repairs (With Straightening System)

Preliminary Work For Body Repairs (With Straightening System)

  1. Remove add-on parts in the repair area.
    1. 1.1  Remove add-on parts in the repair area according to the extent of damage on the vehicle.
  2. Set up straightening bench with straightening system.
  3. Set the vehicle on the straightening bench.
  4. Cover add-on parts adjacent to the rep air area on the vehicle.
    1. 4.1  Cover all accessories remaining on the vehicle an 1 adjacent areas with 'ire-proof protective covers.
  5. Reshape connection area of the sheetmetal parts to be replaced. See Information on aluminium repairs

    > 5X00IN05 INFORMATION ON ALUMINIUM REPAIRS - section on "Information"

  6. Expose joint areas.
    1. 6.1  Remove underbody protection, paint, etc. from the joint areas of the body using a hot-air gun or rotary brush.
scientia non olet · About LEMON Manuals