Removing Front Cross Panel (Front Crash Support)

Information 

• Some of the repair illustrations show only one side of the vehicle or a similar component. 
• Naturally, some steps also have to be performed on the opposite side of the vehicle as well. 

1. Unscrew self-tapping screws -1-  .

   > 5X00IN24 SETTING SELF-TAPPING SCREWS

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Self-tapping screws

2. Grind down welded seams -1-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Welded seams

3. Heat bonding areas using > V.A.G 1416 - Hot-Air Blower  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Bonding areas

4. Remove frent cress panel (front crash support).