Installing Side Member Reinforcement (Coupe)

Apply adhesive on joint areas of the body.
Apply adhesive evenly over the entire bonding surface. > Application depth 0.5 mm

> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Apply adhesive to the floorpan.
Apply adhesive evenly over the entire bonding surface. > Application depth 0.5 mm

Also apply a bead of adhesive all around the bonding surface. > Application depth 3 mm

> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Screw in and tighten self-tapping screws.
> 5X00IN24 SETTING SELF-TAPPING SCREWS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screws

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screws

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screws

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screws

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screws
Rivet in side member reinforcement (Coupe). > BLIND RIVET 999.190.229.01

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Blind rivets
Rivet in side member reinforcement (coupe) on rear wheel housing. > BLIND RIVET 999.190.229.01

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Joints
Screw in and tighten self-tapping screw -1- .
> 5X00IN24 SETTING SELF-TAPPING SCREWS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Joints
Rivet in side member reinforcement (Coupe). > BLIND RIVET 999.190.228.01

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Blind rivets