Preparing Inner Side Member (Coupe) For Installation

Fit in inner side member and secure it to the body.
Drill bores for rivets. > Diameter 6.6 mm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bore holes for rivets
Drill bores for rivets. > Diameter 6.6 mm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Punch rivets
Drill holes for self-tapping screws.
> 5X00IN24 SETTING SELF-TAPPING SCREWS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bore holes for self-tapping screws
Remove inner side member.

Prepare marked areas for bonding, riveting and full steel welding.

6.1 Prepare areas -A- for bonding and riveting.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

6.2 Prepare area -B- for full steel welding.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Marked areas