LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> Collision >> Body Panels >> 51 - Body Center, Roof, Frame - 911 CARRERA (992) (1 Of 3) >> WM, 51425503 Replacing B-Pillar (Inner) Reinforcement (Coupe) >> Removing The B-Pillar (Inner) Reinforcement

Removing The B-Pillar (Inner) Reinforcement

  1. Unscrew and remove screws -1-  .
    G14245979Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screws

  2. Unscrew screw -1-  .
    G14245980Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screw

  3. Loosen friction element welded joints. > Friction element welded joints 

    > 5X00IN29 REPLACING FRICTION ELEMENT WELDED JOINT

    G14245981Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Friction element welded joints

  4. Loosen friction element welded joints. > Friction element welded joints 

    > 5X00IN29 REPLACING FRICTION ELEMENT WELDED JOINT

    G14245982Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Friction element welded joints

  5. Grind off welded seam. > Welded seam on B-pillar 
    G14245983Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Welded seam on B-pillar

  6. Heat bonding areas using > V.A.G 1416 - hot-air blower  .
    G14245984Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

  7. Heat bonding areas using > V.A.G 1416 - hot-air blower  .
    G14245985Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bonding areas

  8. Remove B-pillar reinforcement.