Installing (inner) B-pillar reinforcement
- Apply adhesive on joint areas of the body.
Apply adhesive evenly over the entire bonding surface. > Application depth 0.5 mm
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00
Applying adhesive
- Apply adhesive on joint areas of the body.
Apply adhesive evenly over the entire bonding surface. > Application depth 0.5 mm
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00
Applying adhesive
- Apply adhesive on the (inner) B-pillar reinforcement in area -A_-
.
Apply adhesive evenly over the entire bonding surface. > Application depth 0.5 mm
Also apply a bead of adhesive all around the bonding surface. > Application depth 3 mm
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00
Applying adhesive
- Rivet in (inner) B-pillar reinforcement in the roof frame area.
Blind rivets
A > BLIND RIVET 999.190.228.01 B > BLIND RIVET 999.190.229.01 - Apply a full steel weld to the (inner) B-pillar reinforcement.
Welded seam on B-pillar
- Press flow-form welding rivet using > VAS 6790 - compact booster
.
> 5X00IN29 REPLACING FRICTION ELEMENT WELDED JOINT
Friction weld elements
- Tighten screw -1-
to > Tightening torque 4 (3 ft.lb) Nm
.
Screw
- Tighten screws -1-
to > Tightening torque 40 (30 ft.lb) Nm
.
Screws