Installing B-Pillar Reinforcement (Coupe)

Information 

• Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive.
• Bonding can only be carried out reliably when a smooth and swift sequence of operations is guaranteed.
• Do not begin bonding work until all materials and tools necessary for later repair work are available.

1. Install B-pillar reinforcement (Coupe) and check that it fits perfectly.
2. Apply adhesive evenly over the entire bonding surface of the body. > Application depth 0.5 mm 

   > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Connection areas of body

3. Apply adhesive to the B-pillar reinforcement (Coupe).

   Apply adhesive evenly over the entire bonding surface. > Application depth 0.5 mm 

   Also apply a bead of adhesive all around the bonding surface. > Application depth 3 mm 

   > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Bonding areas

4. Resistance spot-weld B-pillar reinforcement (Coupe).

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Spotwelds

5. Rivet in B-pillar reinforcement (Coupe). > BLIND RIVET 999.190.229.01 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Blind rivets

6. Rivet in B-pillar reinforcement (Coupe) in areas -A and B-  . > BLIND RIVET 999.190.227.01 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Blind rivets

7. Tighten self-tapping screws -1-  .

   > 5X00IN24 SETTING SELF-TAPPING SCREWS

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Self-tapping screws