Remove A-Pillar Reinforcement (Coupe)

Unscrew self-tapping screws -1- .
> 5X00IN24 SETTING SELF-TAPPING SCREWS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screws
Drill out spotwelds -A- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Spotwelds
Remove punch rivets -B- using > VAS 852 001 - Body Dent Removal System, Aluminium and > VAS 6790 - Compact Booster .
> 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Punch rivets
Heat bonding areas using > V.A.G 1416 - Hot-Air Blower .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Bend up tabs -1- using > VAS 6635 - Crimping pliers set, 4-piece .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Tabs
Lift the roof pillar slightly and remove A-pillar reinforcement (Coupe).