Preparing Connection Areas Of Body For Installing A-Pillar (Coupe)

Information

Before final assembly, make sure you fully understand all the work steps involved and carry out a trial assembly without applying adhesive.
The bonding process can only be carried out reliably when a smooth and swift sequence of operations is guaranteed.
Do not begin bonding work until all materials and tools necessary for later repair work are available.

Align the sealing surfaces and connections of the body.
De-burr connection areas and prepare for welding.
Prepare marked areas -A- on the A-pillar (Coupe) for bonding and resistance spot-welding.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Welding areas
Prepare marked area -B- for applying a full weld using inert gas.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Welding range
Prepare marked area -C- for aluminium welding.
> 5X00IN10 WELDING ALUMINIUM

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Welding range