Preparing Jacking Point For Installation

Fit in new front jacking point and secure it to the inner side member.
Drill through bore holes for blind rivets -A and B- .
> 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

> Diameter 6.6 mm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Blind rivets
Remove jacking point.
Prepare jacking point for bonding and riveting,
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection area on jacking point