Preparing Front Side Member (Inner Rear Section) For Installation

Fit in front side member (inner rear section) and secure it to the body.
Drill bore holes for rivets -A and B- .
> 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

> Diameter 6.6 mm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bore holes for rivets
Remove front side member (inner rear section).
Prepare marked areas for bonding and riveting.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection areas