Installing Adapter Plate For Inner Side Member

> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas

1. 2.1  Apply adhesive evenly over the entire bonding surface. > Application depth 0.5 mm 
2. 2.2  Also apply a bead of adhesive all around the bonding surface. > Application depth 3 mm 

   > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Bonding surface on adapter plate for inner side member

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Blind rivets

> 5X00IN24 SETTING SELF-TAPPING SCREWS

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Self-tapping screws