Preparing Front Side Member (Outer Rear Section) For Installation

Fit in front side member (outer rear section) and secure it to the body.
Drill bore holes for rivets -A and B- .
> 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

> Diameter 6 .6 mm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bore holes for punch rivets
Remove front side member (outer rear section).
Prepare connection areas for bonding and riveting.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Connection areas