Removing Front Wheel Housing

Loosen joint points for front wheel housing (inner section).

1.1 Remove punch rivets -A- using > VAS 852 001 - Body Dent Removal System, Aluminium and > VAS 6790 - Compact Booster.
> 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

1.2 Drill out penetrated joints -B- .

> diameter 6.6 mm

G14224913

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Joints

Heat bonding areas using > V.A.G 1416 - Hot-Air Blower.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Remove front wheel housing (inner section).

Loosen joint points for front wheel housing (outer section).

4.1 Remove punch rivets -A- using > VAS 852 001 - Body Dent Removal System, Aluminium and > VAS 6790 - Compact Booster.
> 5X00IN23 REPLACING PUNCH RIVETS AND PENETRATED JOINTS

4.2 Drill out punch rivets -B- .

G14224915

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Joints

Heat bonding areas using > V.A.G 1416 - Hot-Air Blower.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding areas
Remove front wheel housing (outer section).