LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> Collision >> Body Panels >> 50 - Body Front - 911 CARRERA (992) >> WM, 505519 Removing And Installing Front Wing >> Installing Front Wing

Installing Front Wing

  1. Installation is performed in reverse order.
  2. Tighten nut securing front wing to strut to > Tightening torque 8 (6 ft.lb) Nm  .
  3. Tighten front wing screws at the top to > Tightening torque 8 (6 ft.lb) Nm  .
  4. Tighten front wing screws at the rear to > Tightening torque 8 (6 ft.lb) Nm  .
scientia non olet · About LEMON Manuals