Preparing Wing Connection Panel For Installation

Drill holes for BLIND RIVETS -A and B- through both sheet metal panels.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Blind rivets

A	> Diameter 4.1 mm
B	> Diameter 6.6 mm

Countersink holes for countersunk BLIND RIVETS -A- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Countersunk blind rivets
Remove wing connection panel.
Prepare wing connection panel for bonding and riveting.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Joint areas