Preparing Luggage Compartment Bracket For Installation

Affix markings -A, B, C, D and E- to the luggage compartment bracket.

2.1 Affix two horizontal markings -A and D- to the sides of the longitudinal member.

2.2 Affix three vertical markings to the inside of the side luggage compartment bracket -B, C and E- .

Location	Type	Basic value Tolerance
Dimension A	Distance	15 mm
Dimension B	Distance	56 mm
Dimension C	Distance	28 mm
Dimension D	Distance	25 mm
Dimension E	Distance	18 mm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Luggage compartment bracket

Drill bores for rivets at the previously applied markings. > Diameter 6.6 mm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Inner bores
Drill holes for rivets through the existing holes. > Diameter 6.6 mm

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Outer bores
Remove luggage compartment bracket.
Prepare marked areas for bonding and riveting.
> 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Bonding area