Safety And Quality Instructions
- Risk of damage to the vehicle
- Danger of injury
Observe the relevant safety instructions.
→> 5X00IN01 Safety instructions
Observe the relevant general information and information on quality.
→> 5X00IN07 General information and information on quality
Observe general warning notes for working on the high-voltage system.
→> 2X00IN General warning notes for working on the high-voltage system
Observe general warning notes for working on the high-voltage vehicle electrical system.
→> 2X00IN General warning notes for working on the high-voltage vehicle electrical system
Observe instructions for isolating from power supply.
→> 2X00IN Isolation from power supply prior to performing maintenance tasks on BEV vehicles
- Protection of electrical components during body repairs.
→> 5X00IN02 Protection of electrical components during body repairs
- Corrosion protection measures during repair work.
→> 5X00IN03 Corrosion protection measures during repair work
- Information on aluminium repairs.
→> 5X00IN05 Information on aluminium repairs
- Body parts of various sheet-steel strengths.
→> 5X00IN04 Body parts of various sheet-steel strengths
- Replacing punch rivets and penetrated joints.
→> 5X00IN23 Replacing punch rivets and penetrated joints
- Replacing friction element welds.
→> 5X00IN29 Replacing friction element welded joint
- Set self-tapping screws.
→> 5X00IN24 Setting self-tapping screws
- Set weld studs.
→> 5X00IN11 Stud welding
- Use body structural adhesive.
→> 5X00IN21 Working with body structural adhesive PAH.071.781.00