Installing Angle Brackets

1. 1.1  Apply adhesive evenly over the entire bonding surface. > Application depth 0.5 mm 
2. 1.2  Also apply an adhesive bead of sealant all around the bonding surface. > Application depth 3 mm 

   > 5X00IN21 WORKING WITH BODY STRUCTURAL ADHESIVE PAH.071.781.00

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Applying adhesive to angle brackets

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Blind rivets

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Punch rivets

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Blind rivets