Technical Values
| Location | Description | Type | Basic value | Tolerance 1 | Tolerance 2 |
|---|---|---|---|---|---|
| Brake disc diameter, front | Diameter | 410 mm | |||
| Brake disc diameter, rear | Diameter | 390 mm | |||
| Brake disc thickness, front | Measured value | 36 mm | |||
| Brake disc thickness, rear | Measured value | 32 mm | |||
| Thickness tolerance of brake discs, maximum | Measured value | 0.02 mm | |||
| Pad thickness, front | Measured value | approx. 12.0 mm | |||
| Pad thickness, rear | Measured value | approx. 12.0 mm | |||
| Brake disc wear limit, front and rear | Measuring VAS 6813 Tester. Observe measuring pre-requisites. New values/wear values and three measuring points are lasered onto the brake disc hub. Wear value reached: Replace PCCB brake discs on each axle. |
Measured value | Read off values on the brake disc hub | ||
| Thickness tolerance of brake discs, maximum | Measured value | 0.02 mm | |||
| Lateral runout of brake disc, maximum | Measured value | 0.03 mm | |||
| Lateral runout of wheel hub, maximum | Measured value | 0.03 mm | |||
| Lateral runout of brake disc when installed, maximum | Measured value | 0.06 mm |