Installing Front Seat-Surface Extension
- Installation is performed in reverse order. Pay particular attention to the following:
Tighten screws securing front seat-surface extension to seat frame to > Tightening torque 6 Nm (4.4 ftlb.) +/- 1 Nm (0.7 ftlb.) .
Tighten screws securing padding for front seat-surface extension to > Tightening torque 1.8 Nm (1.3 ftlb.) +/- 0.2 Nm (0.1 ftlb.) .
Tighten screw securing holder for memory seat adjustment control unit to control unit to > Tightening torque 3 Nm (2.2 ftlb.) +/- 0.5 Nm (0.4 ftlb.) .