Labor Operations
| Labor operation number | Description | Time units (TU) |
|---|---|---|
| 72012343 | Removing backrest cushion and footrest cushion assembly, installing molded parts/visible parts, backrest cushion and footrest cushion assembly | 35 |
Model year
From 2019
Equipment:
Full bucket seat
Situation:
Retrofitting
Information
ONLY for markets in which new vehicles are certified according to the Worldwide Harmonized Light Vehicles Test Procedure (WLTP): Retrofitting of components BEFORE the date of first registration of the vehicle is not permitted!
Background:
Technical modifications (additions/conversions) made between the vehicle delivery date (reference point for creation of the Certificate of Conformity (CoC) document) and the date of first registration can render the CoC document and the actual vehicle configuration inconsistent, thereby failing to comply with the requirement for WLTP certification.
Part No.:
Cushion + backrest assembly with three different degrees of hardness
| 982.044.779 | Cushion + backrest assembly - Soft |
| 982.044.779.A | Cushion + backrest assembly - Medium |
| 982.044.779.B | Cushion + backrest assembly - Hard |
Set of visual elements in different colors
| 982.044.789 8YR | Black, 3-piece |
| 982.044.789 84A | Guards Red, 3-piece |
| 982.044.789 1S1 | Racing Yellow, 3-piece |
| 982.044.789 M7K | Arctic Grey, 3-piece |
| 982.044.789 IG4 | Deep Sea Blue, 3-piece |
| 982.044.789 D5C | Shark Blue, 3-piece |
Procedure:
- Remove backrest cushion
> Removing and installing cushion with cover for front middle backrest (full bucket seat)
- Remove footrest cushion assembly
> Removing and installing padding with seat cover (full bucket seat)
Installing 3D footrest cushion assembly and backrest cushion
- Install footrest cushion assembly and check that it is seated correctly. The red decorative seams of the cushion may no longer be visible.
> Removing and installing padding with seat cover (full bucket seat)
- Install backrest cushion and check that it is seated correctly. The red decorative seams of the cushion may no longer be visible.
> Removing and installing cushion with cover for front middle backrest (full bucket seat)
- Push molded part/visible part for footrest cushion assembly into the cushion.
- Push in molded part/visible part for backrest cushion.
72 01 23 43:
Removing backrest cushion and footrest cushion assembly, installing molded parts/visible parts, backrest cushion and footrest cushion assembly; Labor time 35 TU