Removing Control Unit For Memory Seat Adjustment

NOTE: NOTIFICATION
Voltage peaks

Risk of damage to electrical load or to the control unit
→ Switch off ignition and keep transmitter key outside of the transmission range (at least 5 m).

→ Switch off electrical loads before disconnecting or removing them.

Information

Always comply with the regulations for handling ESD-sensitive components!

Always wear approved work clothes and shoes when carrying out assembly work.
Do not remove new parts from ESD (electrostatic discharge) protective packaging until shortly before installation.
Do not touch electric pins and plug contacts.

Move front seat all the way back and up.
Release holder -1- and detach control unit for memory seat adjustment -2- from the seat frame until the electric plug connections are accessible.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Control unit for memory seat adjustment

Information

The number of electric plug connections will vary depending on equipment.
Release electric plug connections -1- and disconnect them.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Electric plug connections
Remove control unit for memory seat adjustment -2- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Control unit for memory seat adjustment