LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> Body & Frame >> Seats >> 72 Seat Frames -- 992 - 911 CARRERA (992) >> WM, 726319 Removing And Installing Locking Mechanism For Rear Backrest >> Installing Locking Mechanism For Rear Backrest

Installing Locking Mechanism For Rear Backrest

  1. Installation is performed in reverse order. Pay particular attention to the following:

    Tighten screws securing locking mechanism for backrest to rear backrest frame to > Tightening torque 10 Nm (7.5 ftlb.) + 2 Nm (1.5 ftlb.)  .

    Tighten screw securing locking mechanism for backrest to rear backrest to > Tightening torque 1, 5 Nm +/- 0, 3 Nm  .

    Press in actuating lever on locking mechanism for backrest until it engages securely.

scientia non olet · About LEMON Manuals