LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> Body & Frame >> Seats >> 72 Seat Frames -- 992 - 911 CARRERA (992) >> WM, 722519 Removing And Installing BOWDEN Cable For Backrest Release >> Removing BOWDEN Cable For Backrest Release

Removing BOWDEN Cable For Backrest Release

  1. Disconnect bowden cable for backrest release -2-  .
    1. 1.1  Unscrew screw -1-  on bowden cable for backrest release -2-  .
    2. 1.2  Unclip bowden cable for backrest release -2-  at the top.
      G15534458Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Bowden cable for backrest release

  2. Disconnect bowden cable for backrest release at the left -4-  .
    1. 2.1  Unclip retaining clip at the top -1-  .
    2. 2.2  Disengage retaining clip at the bottom -2-  (-arrow-  ).
    3. 2.3  Unclip mounting for locking lever -3-  .
      G15534459Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Bowden cable for backrest release, left

  3. Disconnect bowden cable for backrest release at the right -4-  .
    1. 3.1  Unclip retaining clip at the top -1-  .
    2. 3.2  Disengage retaining clip at the bottom -2-  (-arrow-  ).
    3. 3.3  Unclip mounting for locking lever -3-  .
      G15534460Courtesy of PORSCHE CARS NORTH AMERICA, INC.

      Bowden cable for backrest release, right

  4. Guide out bowden cable for backrest release.
scientia non olet · About LEMON Manuals