Removing Backrest Frame

1. 1.1  Unscrew screw -1-  .
2. 1.2  Unclip backrest cover -2-  at the rear -arrow A-  .
3. 1.3  Guide backrest cover -2-  forward and remove it -arrow B-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Backrest cover

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Loop for seat operation

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Holder for suction fan for seat backrest

Unscrew screws -1-  and remove holder for control valve for lumbar support -2-  by pulling it upwards.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Holder for control valve for lumbar support

Information 

Two people are needed to remove and install the backrest frame.

1. 5.1  Hold backrest frame -2-  upright.
2. 5.2  Unscrew and remove screws -1-  .
3. 5.3  Remove backrest frame -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Backrest frame