Removing Rear Logo

Heat the area -1- around the logo -2- using the > V.A.G 1416 - hot-air blower-3- .

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Heating area around the logo (shown on the 991)
Pull off the logo using a plastic spatula.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Prising off logo (shown on the 991)
Remove residual adhesive -1- around the logo -2- using silicone remover.

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Cleaning logo area (shown on the 991)