LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 66 Exterior Equipment -- 992 - 911 CARRERA (992) >> WM, 660719 Removing And Installing Front Logo >> Installing Front Logo

Installing Front Logo

Information 

The nuts for the logo must always be replaced.

  1. Installation is performed in reverse order.
  2. Tighten nuts for front logo to > Tightening torque 1.3 Nm (0.6 ftlb.) - 0.2 Nm (01 ftlb.) 
scientia non olet · About LEMON Manuals