LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 - Bumpers - 911 CARRERA (992) >> WM, 635519 Removing And Installing Rear Apron >> Removing Rear Apron

Removing Rear Apron

Fig 1: Rear Apron Component Location
G14263919Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position 

Information 

  1. Unscrew nut on rear wheel housing liner -1-  .
    G14263920Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Nut on wheel housing liner 

  2. Unscrew and remove screws -1-  and -2-  .
    G14263921Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screws on rear apron at wheel housing 

  3. Unclip plug connections -2-  .
    G14263922Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Plug connection for rear apron 

  4. Unscrew and remove screw -1-  .
    G14263923Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screw on rear apron 

  5. Unscrew screws at the bottom
    G14263924Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screws on rear apron, bottom 

  6. Unscrew screws -1-  at the top.
    G14263925Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screws on rear apron, top 

    Information 

    Get another person to help you to remove the rear apron.

  7. Carefully disengage rear apron at the sides -A-  .
    G14263926Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Disengaging rear apron 

  8. Remove rear apron by pulling it to the rear -B-  .
    G14263927Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Removing rear apron