LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 - Bumpers - 911 CARRERA (992) >> WM, 631519 Removing And Installing Front Apron >> Removing Front Apron

Removing Front Apron

G14263889Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position 

  1. Unscrew screws at the bottom -1-  .
    Fig 1: Front Apron Component Location
    G14263890Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Bottom of front apron 

  2. Unscrew screw at the sides -1-  .
    G14263891Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Side of front apron 

  3. Disconnect hose for cleaning system -1-. 
    G14263892Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Hose for cleaning system 

    1. 3.1  Disconnect hose for cleaning system -1- by pressing in the locking mechanism -2-.
    2. 3.2  Unclip holder -3-.
  4. Loosen wiring harnesses.
    G14263893Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Electric plug connection 

    1. 4.1  Release and unplug electric plug connections -1-. 
    2. 4.2  Unclip wiring harnesses -2-  .
  5. Pull off locking mechanism using > T10118 - assembly tool or > 3438 - hook. -arrow- 
    G14263894Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Locks on top of front apron 

  6. Unscrew screws -1-  and remove front apron -2-  by pulling it forward.
    G14263895Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Top of front apron