Removing Front Bumper

Information 

Seals -1-  between the front bumper and body must always be replaced whenever the front bumper is removed and installed.

Fig 1: Front Bumper Component Location

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Seal 

Courtesy of PORSCHE CARS NORTH AMERICA, INC.

Installation position 

1. Unscrew screw -1-  and leave holder -2-  hanging on cable -3-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Holder for garage door opener control unit 

2. Only for Turbo:  Unscrew screws.

   Screws 

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

3. Unscrew screws -1-  and remove bumper -2-  .

   Courtesy of PORSCHE CARS NORTH AMERICA, INC.

   Front bumper