LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 63 - Bumpers - 911 CARRERA (992) (Turbo) >> WM, 63151920 Removing And Installing Front Apron >> Removing Front Apron

Removing Front Apron

  1. Unscrew screws at the bottom -1-  .
    G14263968Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Screws 

  2. Pull lower part of front apron -1-  down and out -arrow A-  and guide out the clips -2- (-arrow B-). 
    G14263969Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Front apron 

  3. Release and disconnect hose connections -1-  for the pneumatic lines.
    G14263970Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Pneumatic lines 

  4. Unscrew screw at the sides -1-. 
    G14263971Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Side of front apron 

  5. Disconnect hose for cleaning system
    G14263972Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Hose for cleaning system 

    1. 5.1  Disconnect hose for cleaning system -1-  by pressing in the locking mechanism -2-  .
    2. 5.2  Unclip holder -3-  .
  6. Loosen wiring harnesses.
    G14263973Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Electric plug connection 

    1. 6.1  Release and unplug electric plug connections
    2. 6.2  Unclip wiring harnesses -2-  .
  7. Pull off locking mechanism using > T10118 - assembly tool  or > 3438 - hook. -arrow- 
    G14263974Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Locks on top of front apron 

  8. Unscrew screws -1-  and remove front apron -2-  by pulling it forward.
    G14263975Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Top of front apron