LEMON Manuals: Even more car manuals for everyone
Home >> Porsche >> 2021 >> 911 Targa 4 >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> 5X - Body General - 911 CARRERA (992) >> WM, 5X00IN23 Replacing Punch Rivets And Penetrated Joints >> Loosening Joint >> Punch And Bottom Die Pairs

Punch And Bottom Die Pairs

Punch rivet  Pressing punch rivet joints out of two-layered panel joints with restricted access D3 + D5
Pressing punch rivet joints out of three-layered panel joints with restricted access D4 + D5
Pressing punch rivet joints out of two-layered panel joints S4 + D5
Pressing punch rivet joints out of three-layered panel joints S5 + D5
  1. The correct punch and bottom die pair for the punch rivet joint is specified in the table above.
  2. Press out punch rivet using a hydraulic riveting tool > VAS 6790 - Compact Booster  .
    G14223614Courtesy of PORSCHE CARS NORTH AMERICA, INC.

    Pressing out punch rivet

scientia non olet · About LEMON Manuals